Support > OSX Dial-up
Settings
Please note: Cybershore only
provides these online support pages for this connection
type. Telephone support for these outdated operating
systems are no longer available.
To setup your Remote
Access
on Mac OS X, please follow the directions below:
1. Start
from your desktop and click on the Apple in the upper-left
corner. Go down to System Preferences.
2.
From System Preferences,
choose Network. Make sure that Configure is set
to Modem Port. Under the TCP/IP tab, confirm that
Configure states Using PPP
3.
If you are unable to change
any settings because the selections are grayed out,
then you must select Click the lock to make changes
located at the bottom left of the window. If you
are able to make changes, skip to step 5.
4.
After selecting this button
you will be prompted for an administrator password.
This is the password that was entered during the
installation of Mac OS X.
5.
Next, select the PPP tab
and enter the information as shown in the picture:
Service
Provider: Cybershore
Telephone Number:
A local access number for your location.
Account Name:
your dial-up user name (username@cshore.com)
Password:
Your password.
6.
Choose PPP Options...
under the PPP tab. Make sure that the choices below
are selected. Click OK.
7.
Now, from your Applications
folder select Internet Connect; the Phone Book icon.
It should now appear in the Dock. You will have
a Modem Port window that appears. Click on Connect
to connect to the Internet.
